22 Remote Control
22.1 Ethernet Connection
The device can be remote controlled using an 10/100MBit Ethernet Connection. The advantage of Ethernet
is that it is completely platform independent and no device specific drivers are necessary. This makes
Ethernet Remote Control very flexible.
22.1.1 RJ45 Socket
Connect the device to the network using a RJ45 patch cable:
22.1.2 Direct connection
The device can be directly connected to a 10/100MBit Ethernet network interface of your computer.
Typically addresses from the private network address space are used in such an environment.
Address: 10.0.0.100 Address: 10.0.0.105
Subnet: 255.255.255.0 Subnet: 255.255.255.0
To Next Page