Tettex 2293 - Command Reference

Remote Control
187
22.3 Command Reference
• *IDN
Returns a device identification string.
- Query: *IDN?
• GTL
Sets the device to local controlled mode. This function will unlock the local touch panel.
• REN
Sets the device to remote controlled mode. This function will lock the local touch panel.
The device
will only accept remote commands, if a REN command has been issued.
• Mode
Returns the control mode of the device (remote or local).
- Query: Mode?
 Local ¦ Remote
• RemoteToLocal
Transfers the remote device configuration to the local device configuration. This command
must
always be issued for any remote settings to become effective.
• Meas:App
Sets or returns the active measurement application.
- Set: Meas:App [App]
[App] = Res ¦ HR ¦ Dem
- Query: Meas:App?
 [App]
• Meas:Start
Starts the measurement for the current application (Resistance, HeatRun,
Demagnetization …).
• Meas:Stop