Heat Run - Temperature Rise
Enter the license key in the Temp. Rise box
and press OK.
If the temperature rise function was
previously used with a trial license key,
clear this number and replace it with the full
license key.
Press Yes to reboot the unit and install the
detection function.
To access the detection feature, select
temp. rise function in the applications bar
(side bar).
You may need to press the up/down arrow
buttons to view the temperature rise button
depending on which other functions are
enabled.
Trial licenses for temperature rise are
available which permit a limited number of
tests to be performed. The remaining
number of tests is displayed on the license
screen.
Removing the trial license key will remove
the temperature rise function from the
application bar.
To Next Page
Loading...