5-7
dummyheaddummyhead
FUEL SYSTEM
FINAL PROCEDURE (AFTER
TROUBLESHOOTING)
Clear the DTCs.
• DTC (with the Dr.H: page 5-5)
• MIL (without the Dr.H: page 5-5)
Disconnect the SCS service check connector or Dr.H
from the DLC and connect the dummy connector.
PIPING CONNECTIONS
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[9]
[8]
[10]
[11]
[12]
[15]
[14]
[13]
[1] Vapor separator [9] TP sensor
[2] Fuel pump (High pressure side) [10] MAP sensor
[3] Fuel strainer (High pressure side) [11] IAC valve
[4] Pressure regulator [12] Injector
[5] Air vent strainer [13] Water separator
[6] Check valve [14] Fuel strainer (Low pressure side)
[7] Breather tube [15] Fuel pump (Low pressure side)
[8] Silencer case
To Next Page
Loading...
