TOHATSU BFT75A - Maintenance

3-1
3
dummytext
3. MAINTENANCE
MAINTENANCE SCHEDULE ··················· 3-2
ENGINE OIL LEVEL CHECK/OIL
CHANGE·············································· 3-4
ENGINE OIL FILTER CHANGE ················ 3-5
GEAR CASE OIL CHANGE ····················· 3-6
THROTTLE CONTROL CABLE/THROTTLE
LINK CHECK/ADJUSTMENT ··················· 3-9
VALVE CLEARANCE CHECK/
ADJUSTMENT ···································· 3-12
SPARK PLUG CHECK/REPLACEMENT ·· 3-15
PROPELLER AND SPLIT
PIN CHECK ········································ 3-17
ANODE METAL CHECK (OUTER SIDE) ·· 3-17
ANODE METAL CHECK (INNER SIDE) ··· 3-19
IDLE SPEED CHECK/ADJUSTMENT ······ 3-20
LUBRICATION ···································· 3-22
WATER SEPARATOR CHECK··············· 3-25
FUEL STRAINER (LOW PRESSURE SIDE)
INSPECTION/CLEANING ······················ 3-25
FUEL FILTER (HIGH PRESSURE SIDE)
INSPECTION/REPLACEMENT··············· 3-28
FUEL TANK/FILTER CLEANING ············ 3-29
FUEL LINE CHECK/REPLACEMENT ······ 3-30
NUTS, BOLTS, FASTENERS ················· 3-31
CRANKCASE BREATHER CHECK········· 3-31
WATER PUMP CHECK························· 3-31
EMERGENCY STOP SWITCH CHECK ···· 3-31
POWER TRIM/TILT CHECK··················· 3-32
SHIFT CONTROL CABLE CHECK/
ADJUSTMENT ···································· 3-32