TOHATSU BFT75A - Under Cover Front Bracket Disassembly;Assembly

6-17
dummyheaddummyhead
ENGINE COVER
Insert the idle exhaust port [1] into the mount case [2]
until the upper and lower lips [3] of the idle exhaust port
sit on the mount case securely and the upper lip [4] is
level to the mount case as shown.
Install the following:
– L./R. engine under cover (page 6-7)
– Front separate cover (page 6-4)
– Engine cover
UNDER COVER FRONT BRACKET DISASSEMBLY/ASSEMBLY
Remove the under cover front bracket (page 6-12)
[3]
[2]
[4]
[3]
[2]
[1]
BRACKET CAP
UNDER CASE GROMMET (3)
UNDER COVER FRONT
BRACKET
COLLAR (2)
FRONT BRACKET COLLAR