TOHATSU BFT75A - Page 372

14-13
dummyheaddummyhead
CYLINDER HEAD
Install the two alternator cover grommets [1] on the
chain case.
First, loosely tighten the two special bolts [2] on the
chain case to correctly position it.
Then, loosely tighten the ten bolts (6 x 28 mm) [3], three
bolts (6 x 22 mm) [4], and the bolt (6 x 40 mm) [5] on the
chain case.
Tighten the bolts securely in the numbered sequence
shown in two or three steps.
[3]
[5]
[4]
[2]
[1]
Tightening
point
Part name Qty
1,2 Special bolt
(6 x 31 mm)
2
3,6
8 - 12
14 - 16
Bolt (6 x 28 mm) 10
4,5,7 Bolt (6 x 22 mm) 3
13 Bolt (6 x 40 mm) 1
2.
1.
4.
5.
7.
6.
3.
9.
8.
11.
14.
16.
15.
12.
13.
10.