TOHATSU BFT75A - Page 558

19-21
dummyheaddummyhead
CONTROLS
TILLER HANDLE REMOVAL/INSTALLATION
REMOVAL
Remove the control cables (page 19-3).
Remove the two self-locking nuts [1] and two washers
[2].
Remove the two bolts [1] and two washers [2] from the steering bracket [3], and remove the tiller handle [4] and
friction rod [5].
[1]
[2]
[1]
[2]
[3]
[4]
[5]
[2]
[1]