Toro Groundsmaster 360 - Page 138

RemovingtheRearWheelMotor
CAUTION
Beforeopeningthehydraulicsystem,operateallthehydraulic
controlstoreleasesystempressureandavoidinjuryfromthe
pressurizedhydraulicuid;refertoReleasingPressurefromthe
HydraulicSystem(page4–5).
1.Parkthemachineonalevelsurface,lowerthecuttingdeck,shutoffthe
engine,settheparkingbrake,andremovethekeyfromthekeyswitch.
2.Loosen,butdonotremovethelocknut(item15inFigure64)thatsecuresthe
wheelhubtothewheelmotor.Also,loosenthewheel-lugnuts.
IMPORTANT
Beforeliftingthemachinewithajack,reviewandfollowJacking
Instructions(page1–7).
3.Liftthemachinewithajacktoremovetherearwheel,supportthemachine
withjackstands.
4.Removetherearwheelassembly(item16inFigure64),brakedrum,wheel
hub,andbrakeassemblyfromthemachine;refertoServicingtheBrake
(page6–15).
g036038
Figure65
1.Wheelmotor
3.45°hydraulictting(2each)
2.O-ring4.O-ring
5.Cleanthehydraulichoseendsandttingsonthewheelmotortoprevent
contaminantsfromenteringintothehydraulicsystem.
6.Loosenandremovethehydraulictubesfromthettingsonthewheelmotor.
Allowthetubestodrainintoasuitablecontainer.
7.Installcleancapsorplugsonthehydraulictubesandttingstoprevent
systemcontamination.
8.Supportthewheelmotortopreventitfromfallingduringremoval.
9.Removethe4bolts(item21inFigure64)thatsecurethewheelmotorto
thesteeringfork.
10.Removethewheelmotorfromthesteeringfork.
HydraulicSystem:ServiceandRepairs
Page4–80
Groundsmaster360
16225SLRevC