Toro Groundsmaster 360 - Page 213

AssemblingtheSteeringCylinder(continued)
IMPORTANT
EnsurethatyoudonotdamageO-ring(item7inFigure148)as
pistonisinstalledovertherollpinholeinthefrontrod.
3.Installthepiston(item13inFigure148)withnewseal,O-ring,andwear
ringontothefrontrod.
IMPORTANT
Wheninstallingtherollpinintothefrontandrearrods,ensurethat
therodsurfacesarenotdamaged.
4.Slidetherearrodontothefrontrodandaligntherollpinholesintherods.
Installrollpin(item6inFigure148)tosecuretherods.
IMPORTANT
Whenclampingthecylinder’sbarrelinavise;clampontheclevis
onlytopreventdamage.Donotclosetheviseonthebarrelorrods.
5.Mountthesteeringcylinderbarrelinaviseequippedwithsoftjawsby
clampingonthebarrelclevis.
Note:Donotdamagethesealsduringinstallation.
6.Coatalltheinternalcylindercomponentswithcleanhydraulicuid.Slidethe
rodassemblyintothebarrel.
Note:Donotdamagetheheadsealsduringinstallation.
7.Inserttherearheadwithnewsealsintothebarrel.
8.Securethefrontandrearheadsinthebarrelwithexternalcollars,tighten
thecollarswithaspannerwrench.
Groundsmaster360
Page4–155
HydraulicSystem:ServiceandRepairs
16225SLRevC