Toshiba e-STUDIO6520c - Page 127

2
© 2008-2011 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5520C/6520C/6530C
SELF-DIAGNOSTIC MODE
2 - 89
473-0 Feeding
system /
Paper
transport
Paper aligning
amount
adjustment at
the
registration
section
(T-LCF)
Thick
paper 1
ALL 38
<0-63>
M When the value
increases by “1”, the
aligning amount
increases by approx.
0.54 mm.
4
473-1 Thick
paper 2
ALL 38
<0-63>
M4
473-2 Thick
paper 3
(black)
ALL 38
<0-63>
M4
473-3 Thick
paper 3
(color)
ALL 39
<0-63>
M4
480 Feeding
system /
Paper
transport
Paper feed aligning
amount adjustment
(using icons)
ALL - M Press the button on the
LCD.
4
487-0 Drive Fine
adjustment of
transfer belt
motor
rotational
speed
Transport
speed:
Normal
speed
PRT 128
<0-255>
M When the value
increases, the
reproduction ratio in the
secondary scanning
direction becomes
larger. (Approx. 0.1
mm/1 steps)
4
487-1 FAX 128
<0-255>
M4
487-2 PPC 128
<0-255>
M4
487-3 Transport
speed:
Decelerat
ed by 1/2
PRT 128
<0-255>
M4
487-4 FAX 128
<0-255>
M4
487-5 PPC 128
<0-255>
M4
487-6 Transport
speed:
Decelerat
ed by 2/3
PRT 128
<0-255>
M4
487-7 FAX 128
<0-255>
M4
487-8 PPC 128
<0-255>
M4
487-9 Transport
speed:
High
speed
PRT 128
<0-255>
M4
487-10 FAX 128
<0-255>
M4
487-11 PPC 128
<0-255>
M4
Adjustment mode (05)
Code
C
l
assific
ation
Items
Functi
on
Default
<Accept
able
value>
RAM Contents
Proce
dure