Toshiba e-STUDIO6520c - Default Setting; Restore Setting of the EFI Printer Board

e-STUDIO5520C/6520C/6530C © 2008-2011 TOSHIBA TEC CORPORATION All rights reserved
SELF-DIAGNOSTIC MODE
2 - 160
2.6.9 Default setting / restore setting of the EFI Printer Board
The codes whose value can be changed by performing "Default setting of the EFI Printer Board (08-
700)" or "Restore setting of the EFI Printer Board (08-9952)" are listed below.
Adjustment mode (05)
Setting mode (08)
Code Item
Default value
when 08-700 is
performed
Default value
when 08-9952 is
performed
7323-0 Tagbit extension processing for printing
(Black mode)
PS 1 1
7323-1 PCL 1 1
7323-2 XPS 1 1
8103-0 Tagbit extension processing for printing
(Color mode)
PS 1 1
8103-1 PCL 1 1
8103-2 XPS 1 1
Code Item
Default value
when 08-700 is
performed
Default value
when 08-9952 is
performed
1006 Address Mode 1 2
1008 IP address 10 250 250 249 000 000 000 000
1009 Subnet mask 255 255 255 252 000 000 000 000
1010 Gateway 10 250 250 250 000 000 000 000
1011 Availability of IPX 2 1
1014 Availability of AppleTalk 2 1
1060 TCP port number of FTP server 50021 21
1073 Availability of Raw/TCP 2 1
1075 Availability of LPD client 2 1
1078 Availability of IPP 2 1
1089 Availability of FTP print 2 1
1103 Rendezvou setting 2 1
1464 Samba server ON/OFF setting 2 1
1482 User data department management 0 0
1496 Operation setting for User authentication/registration 0 1