Toshiba e-STUDIO6520c - Confirmation of the Updated Data

e-STUDIO5520C/6520C/6530C © 2008-2011 TOSHIBA TEC CORPORATION All rights reserved
FIRMWARE UPDATING
8 - 50
8.4 Confirmation of the updated data
After the updating is completed, check each data version in Setting Mode (08) to confirm that the data
were overwritten properly.
* If “NGD” is displayed for the PFC ROM version (08-906), the downloading of PFC ROM fails.
Update the firmware again.
 P.8-51 "8.5 When Firmware Updating Fails"
Firmware Code Remarks
Updating HDD/UI data 08-944 HDD Version
08-924 Version of UI data language 1 in HDD
Updating System ROM 08-900 System firmware ROM version
08-921 System firmware ROM internal program version
Updating OS 08-920 FROM basic section software version
Updating Engine ROM 08-903 Engine ROM version
Updating Scanner ROM 08-905 Scanner ROM version
Updating PFC ROM 08-906 PFC ROM version
Updating RADF ROM 08-907 RADF ROM version
Updating Finisher ROM 08-908 Finisher ROM version
Saddle stitcher ROM version
08-911 Hole punch unit ROM version
08-9945 Converter ROM version
Updating FAX ROM 08-915 FAX ROM version
Imaging Acceleration Board
ROM
08-9965 Imaging Acceleration Board SROM version