e-STUDIO5520C/6520C/6530C © 2008-2011 TOSHIBA TEC CORPORATION All rights reserved
ADJUSTMENT
3 - 56
3.3.14 Sharpness adjustment
This adjustment is applied when images need to be softer or sharper.
The adjustment is available for each original mode.
<Adjustment Mode (05)>
<Procedure>
The procedure is the same as that of P.3-49 "3.3.2 Gamma balance adjustment (Black Mode)".
3.3.15 Adjustment of smudged text (1200 dpi)
The smudged text can be improved in the following codes.
<Adjustment Mode (05)>
<Procedure>
The procedure is the same as that of P.3-52 "3.3.4 Adjustment of faint text".
3.3.16 Thin line width lower limit adjustment
<Adjustment Mode (05)>
<Procedure>
The procedure is the same as that of P.3-52 "3.3.4 Adjustment of faint text".
3.3.17 Color/black judgment setting for twin color printing images
<Adjustment Mode (05)>
<Procedure>
The procedure is the same as that of P.3-52 "3.3.4 Adjustment of faint text".
Black General Photo
Present
ation
Line art EFI
Item to be
adjusted
Remarks
8118-0 8110-0 8111-0 8112-0 8113-0 8119-0 Text The larger the value is, the
sharper the image becomes. The
smaller the value is, the softer
the image becomes.
Acceptable values: 0 to 255
(Default: 128)
8118-1 8110-1 8111-1 8112-1 8113-1 8119-1 Graphics
8118-2 8110-2 8111-2 8112-2 8113-2 8119-2 Image
Code Remarks
654 The larger the value is, the lighter the small text and fine lines become and the more smudged
text is suppressed.
0: Smudged text is suppressed most
9: Faint text is suppressed most
Acceptable values: 0 to 9
Code Remarks
8240
(600dpi)
Sets the lower limit value of the thin line width when “Distinguish Thin Lines” is selected in the
screen selecting menu of the printer driver.
The larger the value is, the thicker (darker) the thin line becomes.
Acceptable values: 1 to 9
(Default: 2(600dpi), 4(1200dpi))
8241
(1200dpi)
Code Remarks
8218 Sets whether or not to replace the image object with black at the time of twin color printing.
0: OFF
1: ON (replacing with black)
To Next Page
Loading...
