Toshiba e-STUDIO6520c - Procedure for Disabling Data Encryption Function

e-STUDIO5520C/6520C/6530C © 2008-2011 TOSHIBA TEC CORPORATION All rights reserved
BACKUP FUNCTION
4 - 20
4.2.4 Procedure for disabling data encryption function
The basic procedure is the same as the one for enabling this function. To disable it, set “0 (Invalid)” in
the code 08-9379 at step “ P.4-17 "[D] Enable data encryption function".
4.2.5 Procedure for discarding HDD when data encryption function is
enabled
Set the data encryption function disabled following the procedure shown in 21.2.4. Then perform the
code 08-1426 (Forcible HDD data clearing) to completely erase the data in the HDD.