Toshiba e-STUDIO6520c - Setting Range Correction

e-STUDIO5520C/6520C/6530C © 2008-2011 TOSHIBA TEC CORPORATION All rights reserved
ADJUSTMENT
3 - 40
3.2.8 Setting range correction
The values of the background peak in the range correction at the Black Mode can be switched to
“varied” or “fixed” in the following codes.
If they are fixed, the range correction is performed with standard values.
The values of the background peak affects the reproduction of the background density, and the values
of the text peak affects that of the text density.
<Adjustment Mode (05)>
Make a test copy and compare the image obtained with the current settings; if necessary, make
adjustment.
<Procedure>
The procedure is the same as that of  P.3-34 "3.2.2 Density adjustment".
Color
mode
Original mode
Item to be adjusted Remarks
Text/
Photo
Text
Printe
d
Image
Photo Map
User
Custo
m
Gray
Scale
Full
color
7767 7768 7769 7770 7771 7777 --- Automatic density
mode
0:Background
peak/fixed
1:Background
peak/varied
7772 7773 7774 7775 7776 7778 --- Manual density
mode
ACS
black
mode
7667 7668 --- --- --- --- --- Automatic density
mode
7669 7670 --- --- --- --- --- Manual density
mode
Black 7283 7284 --- --- --- 7236 7295 Automatic density
mode
7286 7287 --- --- --- 7237 7296 Manual density
mode