Toshiba e-STUDIO6520c - Platen Sheet

e-STUDIO5520C/6520C/6530C © 2008-2011 TOSHIBA TEC CORPORATION All rights reserved
ADJUSTMENT
3 - 88
3.8.9 Platen Sheet
If a shadow-like dark area appears on the edge of the image, reset the platen sheet
(1) Open the RADF and remove the platen
sheet.
Fig. 3-75
(2) Place the platen sheet on the original glass
and align it to the top left corner. Close the
RADF gently and open it to check if the
platen sheet is attached properly.
Fig. 3-76