7
© 2008-2011 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5520C/6520C/6530C
REPLACEMENT OF PC BOARDS/HDD
7 - 7
7.1.8 PFC board (PFC)
(5) Remove 4 screws and take off the LGC
board case.
Fig. 7-17
(1) Take off the rear cover.
Service Manual “3.5.18 Rear cover”
(2) Disconnect 15 connectors. (in case of a 4-
drawer model)
Fig. 7-18
If the equipment is a tandem LCF-model,
disconnect 13 connectors.
Fig. 7-19
LGC board case