To Next Page

To Previous Page

ADJUSTMENT

3 - 43

3.2.12 Maximum toner density adjustment to paper type

The maximum toner amount adhering to the paper can be controlled.

Note:

The larger the value is, the more frequently fusing offsetting occurs.

The procedure is the same as that of  P.3-34 "3.2.2 Density adjustment".

3.2.13 Maximum text density adjustment

The maximum text density of each color at Full Color Mode can be adjusted as follows.

Make a test copy and compare the image obtained with the current settings; if necessary, make

adjustments according to the following procedure.

Note:

Be sure that this adjustment is made after performing  P.3-32 "3.2.1 Automatic gamma

adjustment".

The procedure is the same as that of  P.3-34 "3.2.2 Density adjustment".

Code Paper type Remarks

1612 Plain paper 1 The smaller the value is, the toner amount adhered

decreases of the high density area (ex. prevention of fusing

offsetting, etc.).

Acceptable values: 0 to 255

(Default: Plain paper: 255, Recycled paper: 255,

Thick paper 1: 255, Thick paper 2: 255, Thick paper 3: 255,

Thick paper 4: 255, special paper 1: 255,

special paper 2: 255, OHP film: 240)

7903 Plain paper 2

1619 Recycled paper

1613 Thick paper 1

1614 Thick paper 2

1615 Thick paper 3

1620 Thick paper 4

1617 Special paper 1

1618 Special paper 2

1616 OHP film

Color Code Item to be adjusted Remarks

Yellow 1630 Maximum text density The larger the value is, the darker the maximum text

density of each color to be adjusted becomes.

Acceptable values: 0 to 10 (Default: 5)

Magenta 1631

Cyan 1632

Black 1633

Toshiba e-STUDIO6520c User Manual

Other manuals for Toshiba e-STUDIO6520c