Toshiba e-STUDIO6520c - Toner Limit Threshold Adjustment

3
© 2008-2011 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5520C/6520C/6530C
ADJUSTMENT
3 - 55
3.3.12 Toner limit threshold adjustment
<Adjustment Mode (05)>
<600dpi>
<1200dpi>
3.3.13 Screen switchover
<Adjustment Mode (05)>
<Procedure>
The procedure is the same as that of  P.3-52 "3.3.4 Adjustment of faint text".
Smooth
(PS/PCL/XPS)
Detail
(PS/PCL/XPS)
Paper type Remarks
8071-0
8070-0 Plain paper 1 The larger the value is, the darker the
image in the high density area becomes.
Acceptable values: 0 to 255
8071-1
8070-1 Plain paper 2
8071-2
8070-2 Recycled paper
8071-3
8070-3 Thick paper 1
8071-4
8070-4 Thick paper 2
8071-5
8070-5 Thick paper 3
8071-6
8070-6 Thick paper 4
8071-7
8070-7 Special paper 1
8071-8
8070-8 Special paper 2
8071-9
8070-9 OHP film
Smooth
(PS)
Detail
(PS)
Paper type Remarks
8090-0
8089-0 Plain paper 1 The larger the value is, the darker the
image in the high density area becomes.
Acceptable values: 0 to 255
8090-1
8089-1 Plain paper 2
8090-2
8089-2 Recycled paper
8090-3
8089-3 Thick paper 1
8090-4
8089-4 Thick paper 2
8090-5
8089-5 Thick paper 3
8090-6
8089-6 Thick paper 4
8090-7
8089-7 Special paper 1
8090-8
8089-8 Special paper 2
8090-9
8089-9 OHP film
Code Remarks
8176 The level of screen ruling shown in the screen selecting menu of the printer driver can
be switched.
0: High screen ruling value (smoother image)
1: Low screen ruling value (rougher image)
8179
(EFI Printer Board)