e-STUDIO5520C/6520C/6530C © 2008-2011 TOSHIBA TEC CORPORATION All rights reserved
SPECIFICATIONS/ACCESSORIES/OPTIONS/SUPPLIES
1 - 2
Automatic
duplexing
unit
Stackless, Switchback type
Acceptable paper size A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, 8K, 16K, 16K-R,
A3Wide (305 x 457mm), SRA3 (320 x 450mm), 320 x 460mm,
LD, LG, LT, LT-R, ST-R, COMPUTER, 13"LG, 8.5" x 8.5",
Full Bleed (12" x 18")
Acceptable paper
weight
64 g/m
2
to 256 g/m
2
(17 lb. Bond to 80 lb. Cover)
Toner supply Cartridge Type
Toner density adjustment Magnetic auto-toner system + Pixel counter control system
Total counter Electronical counter
Memory
(RAM)
Main memory 1 GB
Page Memory 1 GB
HDD 80GB (For hard drives, GB means 1 billion bytes.)
Account Codes 10,000 codes
Department Codes 1,000 codes
Warm-up time
Approx. 180 sec. (Stand-alone, temperature: 20
o
C)
Dimensions of the equipment W 1109 x D 698 x H 1540 (mm) <max.>
W 1109 x D 698 x H 1390 (mm) <min.>
Weight 4 drawers model Approx. 246 kg (542.33 lb.) (equipment including drum)
Tandem LCF model Approx. 245 kg (540.12 lb.) (equipment including drum)
Power requirements
NAC/NAD SAD ASU, ASD,
ARD,
AUC/AUD,
CND
MJC/MJD
Rated voltage AC 115 V AC 127 V AC 220-240 V AC 220-240 V
* The acceptable value of each voltage is ±10%.
Rated frequency 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz
Rated current e-STUDIO5520C 16 A 16 A 10 A 13 A
e-STUDIO6520C 18.5 A 18.5 A
e-STUDIO6530C
Power
consumption
e-STUDIO5520C 2.0 kW or less 2.1 kW or less 2.4 kW or less 3.2 kW or less
e-STUDIO6520C 2.2 kW or less 2.4 kW or less
e-STUDIO6530C
* The electric power is supplied to the Finisher and LCF through the equipment.
698 mm
1109 mm
1540 mm
1390 mm
To Next Page
Loading...
