5
© 2008-2011 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5520C/6520C/6530C
PREVENTIVE MAINTENANCE (PM)
5 - 13
When the counter value of any of the pickup roller, feed roller and separation roller in each unit is
reset, the value of the feeding retry counter is also reset simultaneously. When the [RESET]
button is pressed after selecting the feed unit in the Main Screen, the value of the feeding retry
counter is also reset simultaneously.
The feeding retry counter:
• 1st drawer Reset the feeding retry counter (08-1390)
• 2nd drawer Reset the feeding retry counter (08-1391)
• 3rd drawer Reset the feeding retry counter (08-1392)
• 4th drawer Reset the feeding retry counter (08-1393)
• Bypass unit Reset the feeding retry counter (08-1394)
• T-LCF Reset the feeding retry counter (08-1395)
• O-LCF Reset the feeding retry counter (08-1402)
4th CST.
[4th drawer]
PICK UP ROLLER (4th CST.)
FEED ROLLER (4th CST.)
SEP ROLLER (4th CST.) [Separation roller]
SFB
[Bypass unit]
PICK UP ROLLER (SFB)
FEED ROLLER (SFB)
SEP ROLLER (SFB) [Separation roller]
T-LCF
[Tandem LCF]
PICK UP ROLLER (T-LCF)
FEED ROLLER (T-LCF)
SEP ROLLER (T-LCF) [Separation roller]
O-LCF
[Option LCF]
PICK UP ROLLER (O-LCF)
FEED ROLLER (O-LCF)
SEP ROLLER (O-LCF) [Separation roller]
RADF PICK UP ROLLER (RADF)
FEED ROLLER (RADF)
SEP ROLLER (RADF) [Separation roller]
Main screen Sub-screen
To Next Page
Loading...
Need help?
General
