7
© 2008-2011 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5520C/6520C/6530C
REPLACEMENT OF PC BOARDS/HDD
7 - 11
(2) Disconnect 1 USB terminal and 3
connectors.
Fig. 7-29
(3) Release a harness from 1 harness clamp
and 10 harness clamps with a lock.
Fig. 7-30
(4) Lift the SYS board case to remove it.
Fig. 7-31
(5) Disconnect 1 connector.
(6) Remove 5 harness clamps with a lock.
Fig. 7-32
SYS board case
To Next Page
Loading...
