7
© 2008-2011 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5520C/6520C/6530C
REPLACEMENT OF PC BOARDS/HDD
7 - 15
(4) Release the harness from 1 harness clamp.
(5) Remove 3 screws and take off the reactor
(trance).
Fig. 7-42
(6) Remove 2 screws and take off the duct.
Fig. 7-43
(7) Disconnect 7 connectors.
Fig. 7-44
(8) Remove 4 screws and take off the switching
regulator.
Fig. 7-45
Reactor (trance)
Duct
Switching regulator
To Next Page
Loading...
