e-STUDIO5520C/6520C/6530C © 2008-2011 TOSHIBA TEC CORPORATION All rights reserved
FIRMWARE UPDATING
8 - 12
[B] Confirmation of the updated data
After the updating is completed, check each data version in the Setting Mode (08) to confirm that the
data were overwritten properly.
P.8-50 "8.4 Confirmation of the updated data"
[C] Adjustment
Perform the adjustment of the equipment.
• Performing Image Quality Control (05-396):
P.3-4 "3.1.3 Performing Image Quality Control (IQC)"
• Adjustment of Color Registration Control (05-4719):
P.3-6 "3.1.4 Adjustment of Color Registration Control"
• Automatic gamma adjustment <PPC> (05-1642) (using [4][FAX] test pattern):
P.3-32 "3.2.1 Automatic gamma adjustment"
• Automatic gamma adjustment < PRT > (05-1008) (using [70][FAX] test pattern):
P.3-47 "3.3.1 Automatic gamma adjustment"