e-STUDIO5520C/6520C/6530C © 2008-2011 TOSHIBA TEC CORPORATION All rights reserved
FIRMWARE UPDATING
8 - 48
(5) Remove the internal cover.
Fig. 8-44
(6) Remove the cover plate.
Fig. 8-45
(7) Connect the download jig with the jig connector on the FAX board.
Fig. 8-46
(8) Press the [ON/OFF] button while simultaneously holding down the [0] and [8] buttons.
Updating starts automatically and the LED on the download jig lights.
To Next Page
Loading...
