© 2008-2011 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5520C/6520C/6530C
REVISION RECORD
1
REVISION RECORD
Ver.10
Ver.10 <2011.11.25>
Page Contents
2 Copyright description has been changed.
2-36 8026-0 to 2, 8027-0 to 2, 8028-0 to 2, 8029-0 to 2, 8030-0 to 2,
8031-0 to 2, 8032-0 to 2, 8033-0 to 2, 8034-0 to 2, 8035-0 to 2,
8036-0 to 2, 8037-0 to 2, 8038-0 to 2, 8039-0 to 2, 8040-0 to 2,
8041-0 to 2, 8150-0 to 2, 8151-0 to 2, 8152-0 to 2, 8153-0 to 2,
8154-0 to 2, 8155-0 to 2, 8156-0 to 2, 8157-0 to 2 have been changed.
2-60 Items of 7025 have been changed.
2-69 8026-0 to 2, 8027-0 to 2, 8028-0 to 2, 8029-0 to 2 have been added.
2-70 8030-0 to 2, 8031-0 to 2, 8032-0 to 2, 8033-0 to 2, 8034-0 to 2, 8035-0 to 2, 8036-0 to 2,
8037-0 to 2, 8038-0 to 2 have been added.
2-71 8039-0 to 2, 8040-0 to 2, 8041-0 to 2 have been added.
2-77 8150-0 to 2 has been added.
2-78 8151-0 to 2, 8152-0 to 2, 8153-0 to 2, 8154-0 to 2, 8155-0 to 2,
8156-0 to 2, 8157-0 to 2 have been added.
2-117 8624, 8625, 8626 have been added.
2-123 3631 has been added.
2-128 8628 and 8629 have been added.
4-5 08-620, 621, 622, 623, 624, 629, 1472 have been added.
4-5 08-3631, 8624, 8625, 8626, 8628, 8629 have been added.
4-5 08-3506, 3507, 8608, 8609, 8610, 9015, 9103, 9193, 9700 have been added.
4-21 “and scrambler board” has been deleted.
6-13 [C4E0] and [C4E1] have been changed.
6-13 [C570] and [C580] have been changed.
6-64 [EAE0] and [EB30] have been changed.
6-85 “Fuser unit releasing operation abnormality” has been changed to “Fuser pressure release
abnormality”.
“Fuser unit contacting operation abnormality” has been changed to “Fuser pressure contact
abnormality”.
6-86 [C570] and [C580] have been changed.
6-94 [CB00] and [CB01] have been changed.
6-105 “Converter PC board” has been changed to “LGC board”.
6-123 “M31” has been changed to “M33”.
6-125 “2nd transfer roller position detection sensor” has been changed to “2nd transfer roller con-
tact/release detection sensor”.
8-29 Step 10 has been changed.
8-31 Step 10 has been changed.
8-32 “Converter PC board” has been changed to “LGC board”.
10-1 “10.1 DC Wire Harness” has been added.
10-2 “10.2 Electric Parts Layout” has been added.
To Next Page
Loading...
