INDEX
P/N 06-237041-001 Index-3 February 2011
notification appliances, 24-Vdc,
recommended
, 2-36
O
operator control keys, 1-9
P
parts list, 7-1 to 7-4
password, system, 1-9, 1-11, 3-1, 4-1, 4-5
entering, 4-6
error message, 6-6
installer (Level 2) password, 3-25, 4-5 to 4-6
menu prompt, 3-2
owner (Level 1) password, 3-25, 4-5 to 4-6
system manufacturer (Level 3), 4-5
peripherals, Fwd-iii, 1-11, 2-1, 2-3, 2-28, 2-46
to 2-47, 2-51, 4-6, 4-11 to 4-12, 4-15 to 4-17, 4-19
maximum number of devices, 2-46
setting up, 2-46
wiring diagram, RS485 connections, 2-50
Positive Alarm Sequence, Fwd-ii, 4-15
power connections, 24VDC, internal, 2-20
Power Management Unit (PMU) Board,
1-11 to 1-13, 2-1, 2-3, 2-5, 2-8 to 2-9, 2-12, 2-17,
6-2 to 6-3, 6-5, 7-1, 7-3
fuse replacement, 5-3
installation, 2-9
specifications, 1-29
Power Supply Unit, Fwd-ii, 1-4, 1-6 to 1-7,
1-11 to 1-12, 1-15, 1-29, 2-1 to 2-5, 2-9 to 2-10,
2-15, 2-17, 2-20, 2-35, 2-37 to 2-38, 4-6, 6-2 to
6-4, 6-8, 6-13, 6-20 to 6-21, 7-1, 7-3, A-1, A-4 to
A-5, E-1, F-1, H-2, H-4
connecting wiring harness to PMU Board,
2-11
installation, 2-8
Power Supply/PMU Assembly, Add-On
installation
, 2-25
power, AC, Fwd-iv, 1-12, 1-29, 2-15 to 2-16,
2-25
connecting, 2-15
powering up the system for the first time,
4-7
power-limited, 1-27 to 1-30, 2-29
power-limited wiring routings, recom-
mended
, E-1
printer, label, 1-9
printers, 1-11, 1-20, 2-46, 3-3, 3-15, 6-5
compatible USB and/or RS232, 2-45
R
Relay Card, 1-4, 1-16, 1-18, 2-42
specifications, 1-28
relay module, 2-4, 2-29, 3-3, 3-8, 3-21, 4-13,
4-19
Model AO, Fwd-ii, 1-23 to 1-24, 2-3, 2-30,
3-22, 4-6, 6-12, 7-4
relays, programmable, 2-28
located on MCB, 1-11, 1-29, 2-42
on Relay Card, 1-4, 1-16, 1-18, 1-28, 2-42
Release-Notification Appliance Circuit
(R-NAC)
, Fwd-ii, 1-11, 1-24, 1-29, 2-28, 2-36 to
2-38, 2-40, 3-27
Release-Notification Appliance Circuit
(R-NAC) Card
, 1-4, 1-16 to 1-17, 2-24, 2-35,
2-37, 5-2, 6-16, 6-18
specifications, 1-28
Remote Configuration Software, 1-4, 1-11,
1-17, 1-26, 3-3 to 3-4, 3-9, 3-22
Remote Display Control Module (RDCM),
Fwd-ii, 1-4, 1-8, 1-19 to 1-20, 1-29 to 1-30, 2-3,
2-29, 2-46 to 2-49, 3-4, 3-9, 3-14, 4-6, 4-11 to
4-12, 4-15 to 4-17, 4-19, 6-20 to 6-21, 7-1 to 7-2,
A-1
Remote LED Annunciator Module
(R-LAM)
, 1-4, 1-8, 1-19, 1-29 to 1-30, 2-3, 2-29,
2-46 to 2-49, 3-9, 3-37, 4-6, 4-11 to 4-12, 4-15 to
4-17, 4-19, 7-2, A-1
Remote Release Module (RRM), 1-23, 1-25,
2-29 to 2-30, 3-14, 3-20, 3-22, 3-44, 7-4, C-1
RS232, 1-26, 2-4, 2-45, 3-3
configuring the port, 2-44
interface to remote devices, 1-20
ports available on MCB, 1-11
RS485, 1-15, 1-20, 1-30, 2-46 to 2-48, 6-21, 7-3
interface to remote devices, 1-19
ports available on User Interface, 1-11
specifications, 1-29 to 1-30
S
safety summary, Fwd-iii
serial number
entering on initial power-up
, 4-7
shipping carton, contents of, 2-1
Signaling Line Circuit (SLC), Fwd-ii, 1-11,
1-21 to 1-27, 1-30, 2-4, 2-28, 2-30 to 2-34, 3-5,
4-1 to 4-3, 4-10, 5-2, A-1, B-1
isolator modules, 1-25, 1-27, 2-29, 7-4
recommended wire types, B-1
To Next Page
Loading...
Need help?
General