Vaisala RVP900 - Load Clutter Filter Flags (LFILT)

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
---------------------------------------------------------------
| | | | | | | | | | | | | | | | |
| Range mask spacing for current pulsewidth (cm) | Output 58
|----------------------------------------------------------------|
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
---------------------------------------------------------------
| | | | | | | | | | | | | | | | |
| Immediate Status Word #4 (Current State of Affairs) | Output 59
|----------------------------------------------------------------|
Bit 0
Internal power spectra size matches sample size (else power-of-2)
Bit 1
PROC command output spectra match sample size (else power-of-2)
Bit 2
Trigger pattern has been altered to fit within the desired PRT
Bit 3
PRT has been altered to preserve the desired trigger pattern
Bit 4
Using High-SNR packed (I,Q) format
Bit 5
Trigger sequence truncated due to insucient pattern memory
Bit 6
Time series data source is external to RVP900
Bit 7
WSR88D Batch mode is supported
Bit 8
Major mode refuses to use external trigger
Bit 9
GPARM outputs #7 and #8 use Hi-SNR format, else linear
Bit 10
Receiver protection fault
Bit 11
IFDR dual-channel inconsistency (for example, power and/or phase out of bounds for
ratio of HiGain-to-LoGain channels)
Bit 12
GPS 1-pulse-per-second input clock error
RVP900 User Guide M211322EN-J
288