Vertical Express ICON 32

Need help?

Do you have a question about the Vertical Express ICON 32 and is the answer not in the manual?

Summary

Preliminary Installation

Prepare for Temporary Operation

Steps to prepare the system for temporary operation before final installation.

Temporary Operation

Runbug Set Up

Procedure for setting up the runbug for temporary operation.

I-2;I-3 Valve

Relief Pressure Verification

Procedure to verify the pressure relief setting of the valve.

Low Pressure Adjustment

Procedure for adjusting the low pressure setting on the valve.

Selector Tape

Mount the Tape

Steps for mounting the selector tape to the hoistway components.

Preliminary Adjustment

Remove Temporary Operation

User Interface Tool (UIT) Menu Tree

Safety Processor Verification

CAN Node Address Assignment

I;O and Safety String Checkout

Troubleshooting Guide

Safety Processor (SP) bad LED

Steps to troubleshoot when the Safety Processor LED indicates a fault.

Controller User Interface Tool (UIT)

UIT Menu Tree

CAN Node Configuration via the Startup Wizard

Command Sequence

CPU Replacement

Back Up the Job Software

Steps to back up the current job software before replacement.

I-2;I-3 Valve Reference

Valve Final Adjustments

Step-by-step guide for performing final valve adjustments.