Vertical Express ICON 32 - Software Management; Software Version Confirmation

SERVICE INFORMATION
Vertical Express Product Manual 5-31 88500 v.1.0
Service Information Section Software Management
Software Management
Software Version Confirmation
How to determine which versions of software are running in the control system which
determine how the control system functions.
1. Verify that the Controller Inspection Switch in on INSP.
2. Press any button while Vertical Express is displayed in the UIT window, and
enter the pin number - 1234144. See Figure 6.
If the wrong pin number is entered, continue to press UP until Vertical Express
appears in the display window, then enter the pin number again.
Figure 6 - UIT Main Menu Screen
3. Issue a VER Command.
a. When BLOCK SELECT ADJUSTMENTS displays, press ENTER.
b. Press UP until ADJUST MENU COMMANDS COMMON displays.

12
3
4
The numbers on the buttons above are for
illustration and are not printed on the actual UIT.
Vertical Express
Display
Window
BLOCK SELECT
ADJUSTMENTS
ADJUST MENU
COMMANDS COMMON