User Interface Tool
(6300PE1)
Must be ordered as an Owner's
Service Tool (OST).
Requirements when replacing an OST (Owner's Service Tool)
• Must use the specific job number when ordering a
UIT Card (6300PE1) as a replacement.
• The job specific software is provided on a USB
(518BG1) flash drive and ships with the new UIT.
• This replacement part is job specific, requiring
engineering involvement, with a scheduled delivery
time (not “on the shelf” for immediate delivery).
• After the replacement UIT and software is delivered,
the controller must be completely readjusted.
Selector/SPI Loop
Ethernet Cable
To Next Page
Loading...