1. The service-panel can be seen when the right access door is opened.
2. Turn on [TEST]. The various data will be displayed and the test-mode can be entered.
3. By pressing
[↑] and [↓]
, the arrow will point to “
ERROR HISTORY
”. Press [SETTING]
to confirm.
4. By pressing
[↑] and [↓]
, switch to the following page.
4.1.1.4 ERROR HISTORY
※For the error history (the error details can be checked on the error list), refer to P31-36
For error history, refer to P1
Latest error history
For error history, refer to P2
For error history, refer to P3
Final error history
(up to 12 times)
01:E01 COIN JAM
Short for error
Error
History (the smaller the number is, the later the error history is)
5
.
Return to the main menu by pressing [BACK].
20
To Next Page
Loading...
