EasyManua.ls Logo

WAHLAP TECH PUSHING POINTS - Error Handling and Calibration; Error Display and Codes

WAHLAP TECH PUSHING POINTS
121 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4.3 Error List
Way to remove the error
First of all, the error cause shall be found. ON to OFF
of [TEST], press OFF to remove the error.
4.2 Error Display
When an error occurs, "E-" and corresponding error is displayed alternately on the digital
board.
Meanwhile, the error is displayed on LCD and ERROR HISTORY will be saved.
Example: When error 1 occurs
When there are 2 errors and the player can't tell which one is correct, the digital
display-board will alternate between "E-" and error number.
Meanwhile, the error is displayed on LCD and ERROR HISTORY will be saved.
Digital board
Digital board
displayed
alternately
LCD error menu
LCD error menu
Example: When the error is E22 or E20
31

Table of Contents

Related product manuals