WinGD X92 - Page 290

Maintenance3303−5/A2
Winterthur Gas & Diesel Ltd.
4/ 8
14) Attach the manual ratchet (H2, Fig. 6)
to the shackle (94019G).
15) Operate carefully the manual ratchets
(H1, H2) and the chain block (H3) to
move the bearing cover through the
column door.
16) Continue to operate the manual
ratchets (H1, H2) and the chain block
(H3) until the bearing cover is below
the support (94116D) as shown.
17) Remove the chain block (H3).
2017
Top End Bearing Cover − Removal, Inspection and Installation
Fig. 6
H2
H1
94019G
WCH03784
Fig. 7
H2
H1
94019G
WCH03784
H3