Maintenance
3403−1/A1
Winterthur Gas & Diesel Ltd.
5/ 6
WARNING
Injury Hazard: You must
put on safety goggles and
gloves when you do work
on hot components. Oil
can come out as a spray
and cause injury.
16) Do a function check of the cylinder
lubricating system. See 7218−1,
paragraph 1.2.
17) Carefully lower the piston (1, Fig.10)
into the cylinder liner (2).
WARNING
Injury Hazard: Before you
operate the turning gear,
make sure that no
personnel are near the
flywheel, or inside the
engine.
18) Use the turning gear to turn the crank
to BDC.
19) Make sure that the piston rod gland is
in the correct position for the dowel pin
(1, Fig. 11) to align with the crosshead.
2015
Piston: Removal and Installation
Fig. 11
1
2
WCH02943
I
I
I - I
1
WCH02943
Fig. 10
To Next Page
Loading...
