Error code
Description
Action
126.11 Line frequency exceeded the
operating range.
126.14 LVPS relay is stuck or closed.
LLVVPPSS SSeerrvviiccee CChheecckk
Action Yes No
Step 1
Make sure that the printer is
directly plugged into the electrical
outlet.
Does the problem remain?
Go to step 2. The problem is solved.
Step 2
Make sure that the voltage output
of the electrical outlet matches
the voltage rating of the printer.
Does the problem remain?
Go to step 3. The problem is solved.
Step 3
1 Make sure that the PCN1 cable
on the LVPS is properly
connected.
2 Make sure that the JLVPS1
cable on the controller board is
properly connected.
Does the problem remain?
Go to step 4. The problem is solved.
Step 4
Make sure that the voltage output
of the electrical outlet matches
the voltage rating of the LVPS.
Does the problem remain?
Go to step 5. The problem is solved.
Step 5
Perform a POR.
Does the problem remain?
Go to step 6. The problem is solved.
100
Xerox
®
B310 Printer
Service Manual
Diagnostics and Troubleshooting
To Next Page
Loading...
