Xerox B310

Action Yes No
Step 6
Replace the sensor cable.
Does the problem remain?
Go to step 7. The problem is solved.
Step 7
Perform a POR.
Does the problem remain?
Contact the next level of support. The problem is solved.
FFaallssee BBiinn FFuullll EErrrroorr SSeerrvviiccee CChheecckk
Action Yes No
Step 1
Remove, and then install the bin
full sensor actuator. See Bin full
sensor actuator removal .
Does the problem remain?
Go to step 2. The problem is solved.
Step 2
Check the bin full sensor actuator
for damage, and replace if
necessary
Does the problem remain?
Go to step 3. The problem is solved.
Step 3
Check the sensor (bin full) for
damage, and replace if necessary.
Does the problem remain?
Contact the next level of support. The problem is solved.
118
Xerox
®
B310 Printer
Service Manual
Diagnostics and Troubleshooting