Action Yes No
Step 7
Make sure that the JFUSER1 and
JEXIT1 cables are properly
connected on the controller board.
Does the problem remain?
Go to step 8. The problem is solved.
Step 8
Make sure that the high voltage
cable is properly connected to the
LVPS.
Does the problem remain?
Go to step 9. The problem is solved.
Step 9
Perform a POR.
Does the problem remain?
Go to step 10. The problem is solved.
Step 10
Replace the LVPS. See LVPS
removal.
Does the problem remain?
Go to step 11. The problem is solved.
Step 11
Replace the fuser. See Fuser
removal.
Does the problem remain?
Contact the next level of support. The problem is solved.
112266 EErrrroorrss
112266 EErrrroorr MMeessssaaggeess
Error code
Description
Action
126.01 Line frequency has gone outside
the operating range.
See LVPS service check.
126.02 No line frequency was detected.
126.05 The LVPS power dropped but the
printer was not in sleep mode.
126.06 LVPS 25 V line error was detected.
126.07 LVPS 5 V rail was down during
power-on.
126.10 No line frequency was detected.
Xerox
®
B310 Printer
Service Manual
99
Diagnostics and Troubleshooting
To Next Page
Loading...
