Data Security Notice
IIddeennttiiffyyiinngg PPrriinntteerr MMeemmoorryy
• Volatile memory—The printer uses standard random access memory (RAM) to buffer user data
temporarily during simple print and copy jobs.
• Nonvolatile memory—The printer may use two forms of nonvolatile memory: EEPROM and
NAND (flash memory). Both types are used to store the operating system, printer settings,
network information, scanner and bookmark settings, and embedded solutions.
The following parts can store memory:
• Printer control panel
• User interface controller card (UICC)
• Controller board
Note: The printer control panel and controller board contain NVRAM.
EErraassiinngg PPrriinntteerr MMeemmoorryy
To erase volatile memory or buffered data, turn off the printer.
To erase non-volatile memory or individual settings, device and network settings, security settings,
and embedded solutions, do the following:
1. From the control panel, navigate to:
Settings > Device > Maintenance > Out of Service Erase > Sanitize all information on
nonvolatile memory > Yes
2. Select either Start initial setup or Leave printer offline.
136
Xerox
®
B310 Printer
Service Manual
Parts Removal
To Next Page
Loading...
