Xerox B310

Action Yes No
Step 5
Check if the printer is using a
genuine and supported Xerox
toner cartridge.
If the printer is using a third-party
cartridge, then refer the users to
their cartridge supplier.
Is the printer using a genuine and
supported Xerox toner cartridge?
Contact the next level of support. Go to step 6.
Step 6
Insert a genuine and supported
Xerox toner cartridge.
Does the problem remain?
Contact the next level of support. The problem is solved.
VVeerrttiiccaall LLiigghhtt BBaannddss CChheecckk
Note: Before performing this print quality check, print the Print Quality Test Pages. From the
control panel, navigate to Settings > Troubleshooting > Print Quality Test Pages, and then
perform the initial print quality check. See Performing the initial troubleshooting check .
Action Yes No
Step 1
Check if the banding is along the
edge of the paper.
Is the banding along the edge of
the paper?
Go to step 2. Go to step 3.
Step 2
Replace the fuser. See Fuser
removal.
Does the problem remain?
Go to step 3. The problem is solved.
Step 3
Check if the printer is using a
genuine and supported Xerox
toner cartridge.
Go to step 5. Go to step 4.
56
Xerox
®
B310 Printer
Service Manual
Diagnostics and Troubleshooting