Action Yes No
Step 6
Replace the LVPS. See LVPS
removal.
Does the problem remain?
Go to step 7. The problem is solved.
Step 7
Perform a POR.
Does the problem remain?
Contact the next level of support. The problem is solved.
114400 EErrrroorrss
114400 EErrrroorr MMeessssaaggeess
Error code
Description
Action
140.80 Motor (main drive) does not turn
on.
See Motor (main drive) service
check .
140.81 Motor (main drive) does not turn
off.
140.82 Motor (main drive) speed did not
ramp up to the required level.
140.83 Motor (main drive) stalled.
140.85 Motor (main drive) ran too fast.
140.86 Motor (main drive) ran too long.
MMoottoorr ((MMaaiinn DDrriivvee)) SSeerrvviiccee CChheecckk
Action Yes No
Step 1
1 Remove the imaging unit.
2 Manually turn the
photoconductor gear, and then
check the cleaning blade for
damage or failure.
Does the photoconductor drum
rotate?
Go to step 3. Go to step 2.
Step 2
Replace the imaging unit.
Does the problem remain?
Go to step 3. The problem is solved.
Xerox
®
B310 Printer
Service Manual
101
Diagnostics and Troubleshooting
To Next Page
Loading...
