Xerox ColorQube 9303 Series - Page 56

February 2013
2-32
ColorQube® 9303 Family
01H
Status Indicator RAPs
– T1 feed / elevator motor MOT71-002, PL 81.25 Item 22.
– T2 feed / elevator motor MOT72-001, PL 81.26 Item 22.
– T3 feed motor MOT73-001, PL 81.30 Item 22.
– 3 tray transport motor MOT70.025, PL 73.16 Item 3.
– Tray up limit switch, S73-384, PL 81.30 Item 25.
– Tray 3 elevate motor, MOT73-002, PL 73.16 Item 2.
• Repair the wiring as necessary, REP 1.1
• If necessary, install a new 3 tray module PWB, PL 73.16 Item 4
Drum Driver PWB
• To view the +24V distribution from the power supply unit, refer to WD 1.5
• For +24V faults on the drum driver PWB, refer to:
– WD 9.1
– WD 9.2
• The components that follow are driven from +24V from the drum driver PWB:
– Drum fan MOT42-064, PL 94.20 Item 4.
– Cleaning unit delivery pump, part of PL 94.10 Item 21.
– Cleaning unit return reservoir pump, part of PL 94.10 Item 21.
– Cleaning unit PWB, part of PL 94.10 Item 21.
• Repair the wiring as necessary, REP 1.1.
• If necessary, install a new drum driver PWB, PL 1.15 Item 4.
Tray 5 Control PWB
• To view the +24V distribution from the media path driver PWB, refer to WD 8.4.
• For +24V faults on the tray 5 control PWB, refer to:
– WD 7.1.
– WD 7.2.
• The components that follow are driven from +24V from the tray 5 control PWB:
– Tray 5 transport motor MOT75.018, PL 81.40 Item 2.
– Elevator motor MOT75-019, PL 75.68 Item 4.
– Upper limit switch S75-412, PL 75.68 Item 12.
– Tray down limit switch S75-415, PL 75.70 Item 2.
– Feed motor MOT75-117, PL 81.40 Item 3.
• Repair the wiring as necessary, REP 1.1.
• If necessary, install a new tray 5 control PWB, PL 75.68 Item 8.
LCSS PWB
• To view the +24V distribution from the LCSS power supply module, refer to WD 12.1.
• For +24V faults on the LCSS, refer to:
– WD 12.1
– WD 12.3
– WD 12.4
– WD 12.5
• The components that follow are driven from +24V from the LCSS PWB:
– Docking interlock switch S12-177, PL 12.15 Item 2.
– Front door interlock switch S12-303, PL 12.75 Item 5.
– Transport motor 1 MOT12-223, PL 12.40 Item 2.
– SH1 motor MOT12-247, part of PL 12.55 Item 5.
– SU1 motor MOT12-249, part of PL 12.55 Item 5.
– Transport motor 2 MOT12-224, PL 12.60 Item 5.
– Paddle roll motor MOT12-237, PL 12.25 Item 10.
– Punch head motor MOT12-243, PL 12.20 Item 2.
– Front tamper motor MOT12-226, part of PL 12.45 Item 1.
– Rear tamper motor MOT12-227, part of PL 12.45 Item 1.
– Bin 1 upper limit switch S12-190, PL 12.30 Item 3.
– Top cover interlock switch S12-197, PL 12.75 Item 6.
– Bin 1 lower limit switch S12-191, PL 12.35 Item 1.
– Bin 1 elevator motor MOT12.-241, PL 12.30 Item 8.
• Repair the wiring as necessary, REP 1.1.
• If necessary, install a new LCSS PWB, PL 12.75 Item 1.
HVF PWB
• To view the +24V distribution from the HVF power supply module, refer to WD 12.6.
• For +24V faults on the HVF, refer to:
– WD 12.6
– WD 12.7
– WD 12.8
– WD 12.9
– WD 12.10
– WD 12.13
– WD 12.14
– WD 12.15
• The components that follow are driven from +24V from the HVF PWB:
– Transport motor 1 MOT12-223, PL 12.120 Item 2.
– Buffer motor MOT12-262, PL 12.120 Item 1.
– Nip split motor MOT12-164, PL 12.125 Item 15.
– Transport motor 2 MOT12-224, PL 12.120 Item 1.
– BM diverter solenoid SOL12-258, PL 12.120 Item 4.
– Exit diverter solenoid SOL12-225, PL 12.120 Item 4.
– Bypass feed motor MOT12-263, PL 12.120 Item 2.
– Set clamp solenoid SOL12-056, PL 12.120 Item 4.
– Docking interlock switch S12-177, PL 12.100 Item 16.
– Front door interlock switch S12-303, PL 12.115 Item 28.
– Top cover interlock switch S12-197, PL 12.115 Item 24.
– Paddle unit motor MOT12-239, PL 12.120 Item 6.
– Paddle roll motor MOT12-238, part of PL 12.115 Item 2.
– Paper pusher motor MOT12-265, PL 12.115 Item 13.
– Bin 1 elevator motor MOT12-241, PL 12.105 Item 10.
– Stapler gate safety switch S12-319, PL 12.115 Item 17.
– Rear tamper motor MOT12-227, PL 12.110 Item 19.