Xerox DocuCentre SC2020

Fax
Xerox
®
DocuCentre
®
SC2020
User Guide
97
Using the Speed Dial function
To specify the fax recipient by entering a Speed Dial number (001 to 200) registered in the address book:
1. Select the [ ] button.
2. Use the numeric keypad to enter the Speed Dial number.
Note: To delete the entered numbers, press the <C> (Clear) button.
Using the Address Book
To select a fax number, select the [ ] button, and then select one of the following.
• Device Address Book - Individuals: Select an individual fax number and then select [OK].
• Device Address Book - Groups: Select a group dial number and then select [OK].
• Search Network Address Book - Groups: Search and select a fax number from the LDAP server and then
select [OK].
Notes:
•
The fax number needs to be registered before you can select address book.
• Of you are using the LDAP server address book, [Fax Server Address Book] must be set to
[On]. For more information, refer to
Fax Server Address Book on page 179.
Making Advanced Settings
Note: You may need to enter a passcode to use the copy feature. Ask your system administrator for
the passcode.
1. Make advanced settings as needed.
Example: Settings in the [Options] tab
For more information on advanced settings, refer to
Advanced Fax Settings on page 100.