Xerox DocuCentre SC2020

Copy
Xerox
®
DocuCentre
®
SC2020
User Guide
80
Select Tray
To select a tray.
1. Select [Select Tray] on the [Copy] tab.
2. Select the desired setting, and then select [OK].
Note: Bold values are the factory default menu settings.
Note: [Tray 2] is only available when the One Tray Module (Optional) is installed. When [Any] is
displayed as the paper size and type in Tray 5 (bypass), you can select the paper size and type from
this menu.
Auto The paper is fed from an automatically selected tray.
Tray5 (Bypass) The paper is fed from the Tray 5 (bypass).
Tray 1 The paper is fed from Tray 1.
Tray 2 The paper is fed from Tray 2.