Xerox DocuCentre SC2020

Fax
Xerox
®
DocuCentre
®
SC2020
User Guide
104
OnHook
Use this function to send or receive faxes manually.
Notes:
•
For information on how to send a fax manually, refer to Sending a Fax Manually on
page 108.
• For information on how to receive a fax manually, refer to Receiving a Fax Manually in the
TEL Mode
on page 114 or Receiving a Fax Manually Using an External Telephone on
page 115.
2-Sided Scanning
You can set to scan a 1-Sided or 2-Sided.
1. Select [2-Sided Scanning] on the [Fax] tab.
2. Select the copy method, and then select [OK].
–1-Sided
Select [1-Sided] for a one-sided document.
–2-Sided
Select [2-Sided] for a two-sided document.
You can select the edge to be bound from the following.