Environment Settings
Xerox
®
DocuCentre
®
SC2020
User Guide
32
If the device IP address has not been set, set the IP address by using the Printer Setup Utility for Setting IP
Address included in the Driver CD Kit, using the control panel to change the [Get IP Address] setting to
[Panel], or using CentreWare Internet Services.
Notes:
•
If the network has a DHCP server, the device's IP address may be changed, so check the
address periodically.
• The device can acquire address information automatically by using a BOOTP or RARP server.
To use a BOOTP or RARP server to acquire the device's IP address, use the control panel to
change the [Get IP Address] setting to [BOOTP] or [RARP].
• For information on how to use the Printer Setup Utility for Setting IP Address, refer to When
Using the Printer Setup Utility for Setting the IP Address
on page 33.
• For information on how to set the IP address from the control panel, refer to TCP/IP on
page 161.
• For information on how to set the IP address using CentreWare Internet Services, refer to the
online Help of CentreWare Internet Services.
Setting the Device IP Address (IPv6)
The device supports IPv6 addresses in an IPv6 network environment.
Printer Setup Utility for Setting IP Address
Control Panel
CentreWare Internet Services