Xerox DocuCentre SC2020

Tools
Xerox
®
DocuCentre
®
SC2020
User Guide
198
Pages Per Side
Purpose: To print two original pages to fit onto one sheet of paper.
Values:
Edge Erase
Purpose: To specify the value of the top and bottom margins.
Values:
Scan Defaults
To modify the defaults for the [Scan] menu and [Email] menu defaults.
Note: Bold values are the factory default menu settings.
File Format
Purpose: To specify the file format to save the scanned image.
Values:
2  2-Sided - Prints two sided originals on both sides of a sheet of
paper.
Binding of
Original
Long Edge
Binding
Prints on both sides of a sheet of paper to be bound by
long edge.
Short Edge
Binding
Prints on both sides of a sheet of paper to be bound by
short edge.
Off Does not perform Pages Per Side printing.
2-Up Automatically reduces the original pages to fit onto one sheet of paper.
Top/Bottom 0.1 inch (2 mm) Sets the value in increments of 0.1 inch (1 mm).
0.0-2.0 inch (0–50 mm)
Left/Right 0.1 inch (2 mm) Sets the value in increments of 0.1 inch (1 mm).
0.0-2.0 inch (0–50 mm)
Middle 0.0 inch (0 mm) Sets the value in increments of 0.1 inch (1 mm).
0.0–2.0 inch (0–50 mm)
PDF
Multi-Page TIFF