Tools
Xerox
®
DocuCentre
®
SC2020
User Guide
187
Values:
Initialize Print Meter
Purpose: To initialize the print meter of the device. When the print meter is initialized, the meter count is
reset to zero.
Value:
Non-Genuine Toner
Purpose: To use toner cartridge of another manufacturer.
Note: Using a non-Xerox toner cartridge may severely damage the device. The warranty does not
cover damages caused by using non-Xerox toner cartridges.
Values:
Adjust Altitude
Purpose: To specify the altitude of the location where the device is installed.
The discharge phenomenon for charging the photo conductor varies with barometric pressure.
Adjustments are performed by specifying the altitude of the location where the device is being used.
Note: An incorrect altitude adjustment setting leads to problems such as poor printing quality and
incorrect indication of remaining toner.
Fax Settings Initialize Initializes the fax number entries in
the Address Book.
Scan Settings Initialize Initializes the email and server
address entries in the Address Book.
System Settings Initialize Initializes the system parameters.
Initialize Initializes the print meter.
Off Does not use toner cartridge of another manufacturer.
On Uses toner cartridge of another manufacturer.