Xerox DocuCentre SC2020

Copy
Xerox
®
DocuCentre
®
SC2020
User Guide
91
Edge Erase
To specify the top and bottom margins of the copy.
Note: Bold values are the factory default menu settings.
1. Select the [Output] tab, and then select [Edge Erase].
2. Select [ ] or [ ], or use the number pad to enter the desired value.
Top/Bottom 2 mm (0.1")
0  50 mm (0.0  2.0")
Specify the value in increments of 1 mm (0.1 inch).
Left/Right 2 mm (0.1")
0  50 mm (0.0  2.0")
Specify the value in increments of 1 mm (0.1 inch).
Middle 0 mm (0")
0  50 mm (0.0  2.0")
Specify the value in increments of 1 mm (0.1 inch).